Seal Coat

SEAL COATING PROGRAM

SEAL COATING

Seal coating is normally used on streets with a PCI between 55 and 75 (with the rating of 100 being used on a new street). Seal Coating consists of the following:

	The application of an asphaltic binder spray overlaid with crushed trap rock.
	Provides a waterproof surface seal and a skid-resistant surface to the pavement.
	Protects the pavement from the deteriorating effects of traffic, sun, wind, and water.
	Best suited for low-volume, structurally sound streets.

ACCESS TO PROPERTY

Residents may have access to their properties occasionally interrupted during construction days.

LANDSCAPE RESTORATION

The Seal Coating process will typically not disturb boulevard areas.

PROJECT PERSONNEL

Jay Frederiksen from the City of River Falls Engineering Department has been assigned as the primary contact for this project. Questions regarding this project should be directed towards Jay. He may be reached at 425-0900 Ext. 148. Questions may also be directed to the City Engineer, Reid Wronski at 425-0900 Ext. 150.

COOPERATION

Your patience and cooperation during construction will be greatly appreciated. We understand that the construction process creates a significant disruption in your scheduled daily activities. The successful completion of any project is most certainly a cooperative effort of the City of River Falls, the Contractors, and you the Citizen.

PROJECT TIPS BE ALERT!!

Watch for construction workers and vehicles in the construction area. Please drive slowly when in the construction zone; give the workers “THE BRAKE.” Observe warning signs for changing conditions. Please assist in keeping children away from dangerous areas and equipment.